Technical data hm-liquid™
| Fire protection | Class A1 non-combustible |
| Processing | hm-liquid™ can generally be bend up to 180° without cracking at bending radius T1, |
| Alloy | AW 3000 Series in accordance with EN 573, other alloys on request |
| Dimensions | 0,30 - 3,00 mm, width bis max. 2.000 mm, length bis 6.000 mm. Over lengths on request, thinner than 0.3 mm is available for delivery as film |
| Solidity | H42, H44, H46, H48 |
| Coating | Polyester (HDP), polyurethane, polyamide, PVDF |
| Front side | Two-layer coating with/without UV-resistant protection film |
| Back side | Protective coating, optionally also without protective coating |
| Gloss | Standard satin matt approx. 30 E, special gloss levels (20 - 100 E) and surface structures according to customer requirements |
| Range of colours | 20 Colours permanently available, customer-specific production on request |
| Protection film | UV-resistant with approx. 80 μm, for 6 months |
| Quality | Complies with all European standards, in accordance with ECCA, EN 1396 |
| Wastewater ordinance | No special measures required according to ATV-DVWK-M 153 because no harmful heavy metal residue is present |
| Recycling | Coloured aluminium can be added to the recyclable waste cycle |
Important processing instructions:
hm products combine different material properties that can be tailored to individual customer requirements.
In this regard, we advise you to consider important processing instructions:
• Perform bending operations at a material temperature >20°C
• Perform bending operations with corresponding internal bending radii
• When covering a wall surface, use material from one single production batch
• Lay metallic surfaces in the same direction.